Темы

[Dear users, in the personal сabinet you have a the opportunity to purchase key on 7 days, price 4 USDPayment systems of payment, the same PAYEER, Oplata.Info и PayPal.]

Dear users, in the personal сabinet you have a the opportunity to purchase key on 7 days, price 4 USD
Payment systems of payment, the same PAYEER, Oplata.Info и PayPal.

In this thread you can post questions about DNIWEbot, and I will try to respond to all

[1) The most frequent question that occurs in users: what the sliders, checkboxes, distances, etc. in the settings of the BOT? On thatthey influence and what do?]

1) The most frequent question that occurs in users: what the sliders, checkboxes, distances, etc. in the settings of the BOT? On that
they influence and what do?



1. Ambush/attack the percentage of activation the regime at the start of the battle.In an ambush near the base at the end of a fight, he will attack the enemy base.
Оptimal configuration of tank destroyers: ambush 75 attack 25
Оptimal configuration of heavy tank ambush 50 attack 50
For drums such as Т57 Heavy better do an ambush in a larger sense, as the bot does not know how far back off when recharging.
For light tanks ambush 05 attack 95
2. Distance to the group means the distance at which the bot looking for allies and closest ally to follow along with them, the optimal value from 50 to 100. Distance in metres on the map.
3. Time-shifting of position-is the amount of time that the bot in the route point decides to move on, so that the bot is not stood long at one point put a lower value if you want the bot to stand a while in route set to a value greater than.
4. The time that the bot will wait if the enemy is in range and available for shot or in the scope of the BOT-the bot will focus the direction of the shot to the side. If the enemy had disappeared from sight, the bot will have the time to look in the direction that, in the event of a re-emergence of the enemy make shot faster, not turning in another direction. The optimal value from 5 to 10 c.
5. Rotate the cannon.



2) Statistics for the fight. Why is different?

There are several factors that affect stats:
1. players who are with you in random
2. Configure the bot to different tanks
3. network and PC performance



3) Many are wondering why the bot is not going anywhere, shoots from the base and then after a while suddenly can go, that is a bug or other problem?

The bot tries to determine the nearest Allied Group and choose the route to follow after them, if the allies are
closely and do not go, the bot waits for the distribution of the team on the map to make clustering and grouping of the allies. Adjust the distance to the group, so that bot picked up the most immediate and rode the value should be selected individually by the selection. It is likely that it will fail immediately, but try to see what settings the distances to group and other
settings of the bot he begins his motion.
1. the bot will not start If there was any serious boot failure.
2. do not edit and compress resources and files of the bot.


4) How to train the BOT? And as he learns?

The principle of such a bot is looking for the nearest point in the base of  veipoints, if the path to the point it stopped (for example-the street walled ally) when traveling over the obstacle bot is shifting and looking for the closest point in accordance with new coordinates, Point, etc.added ctrl + P-key, that is, the bot will go there to seek, but in accordance with the situation on the map (the obstacles set in Bothe-distance to the group, etc.). The more the cue points, and the smaller the distance between them- the faster it at these points will become. (again-depends on the situation on the map).  Ctrl + M-BOT does not remember all the way which was a tank. For example, a player stood up for stone, stood there for 3 minutes and made 2-3 kills-bot notes this point as a key. Why such a long learning mode ctrl + M to bust with points not too-otherwise the bot will move across the map.



5) How not to get banned for the using a DniweBot?

A few tips:
1)You do not need to use the BOT for a very long time, it is better to 12-15 hours per day.
2)Do not upload screenshots with a bot.
3)Don't tell that you are using the bot.
4)You can ride a couple of fights every hour or two, it will reduce the risks of detection.
5)Enable to send messages in the game chat, It is much less likely ban due to complaints from players.

[FAQ XVM + WarPack]

FAQ XVM + WarPack

Dear users, If you have installed modification of XVM, downloaded from the official website modxvm.com, in the default configuration, problems with the "crash" game because of XVM is not observed. As well, don't forget to check out the relevant version of XVM. If, however, XVM, which you have in the third-party Assembly mods, look for a problem with the "crash", in a third-party Assembly and configuration of XVM.

You can run the game in a standard way, or through the Launcher WarPack, either via the game Launcher upon entering the hangar already run WarPack.

All of the above applies, only the "clear" client, with the only modification XVM.

[[FAQ for Beginners] DNIWEbot]

[FAQ for Beginners] DNIWEbot

For correct operation of the bot need the following programs:

c + + redistributable 2010 http://www.microsoft.com/ru-ru/download/details.aspx?id=5555

Microsoft. NET Framework 4.5 http://www.microsoft.com/ru-ru/download/details.aspx?id=30653

Microsoft Visual Basic Power Packs 10 http://go.microsoft.com/fwlink/?LinkID=145727&clcid=0x804

The Win8-10 do not need to install additional software.

Always make sure that you have the latest drivers for the video card.


The bot must be installed in the folder with the game on a clean client. (it is recommended to install new downloaded client)

Below are screenshots of the installation, with moments that you want to pay attention to the correct installation of the bot.


Run the Setup file


When you see this window, click "OK", nothing actually rewrite we do not have to


Run the installation wizard bot


Specify the path to the folder with the game.
Note, the line must have only one folder with the name of the game if it is two, the latest just remove the from line
Run the bot



Beyond here is the window appears, click "Yes" and further Windows just follow the instructions in the Setup Wizard.

Enter Key
Press start bot (opens settings, not close)
Start the game with a shortcut WOT
Once you must go into the hangar collapse game and go to the Settings window bot.
In the settings window click "UPDATE HANGAR"
Choose tanks that will use Bot:

Then go to the settings selected tanks:
After closing the window, set up the tank "Global Settings" and click "Save Changes"

After all your settings - open the folded game client and start Bot key combination Ctrl + H


WARNING! IMPORTANT!

1) Main window settings should always be open during the game bot

2) After changing the general settings need to press "Save" after changing the settings of a particular tank click save (the window will close automatically)

3) After entering the main settings window click "refresh hangar", only then work with sorting tanks and tanks settings.

4) Exit the game to do only with the standard buttons in the game ive bot. Otherwise, you may encounter problems with non-standard closing applications.

5) Some maps need to roll the tank if it is not enough training points.

6) Be sure to turn off the server scope in the game settings

7) Turn off all types of battles, but a standard (in game settings)

Be sure to turn off the power saving mode, sleep mode, screen saver. Do not submerge your PC into sleep mode - it will create a serious problem with DNS and activation key.

Shortcuts bot:

ctrl + M play themselves using other functions Bot (autoaim, repair, treatment, fire extinguisher, etc.) In this mode, the stored point card. (Push in battle)

ctrl + H bot stop / start bot

ctrl + P conservation point of learning Bot (Push in battle)

[Dear users, you have the option to remove the binding to the gaming account in the personal Cabinet.]

Dear users, you have the option to remove the binding to the gaming account in the personal Cabinet.

Just go to your profile page, then click "unbind" and after some time, your key will be untethered

[Not perfect but it should help you]

Not perfect but it should help you

[In this topic discussion WarPack, for patch 0.9.1Version of WarPack 0.8.9.269WarPack upgraded automatically at startup.]

In this topic discussion WarPack, for patch 0.9.1
Version of WarPack 0.8.9.269
WarPack upgraded automatically at startup.

Доброго времени суток команде варпака и всем остальным! Есть такой вопрос, можно ли получить? демо или пробную версию(или полную хотя бы на день, ну или на пару часов) вашего продукта что бы оценить работоспособность и в случае полного удовлетворения стать вашим постоянным клиентом! Жду адекватных ответов.